Futaba 12K 14-Channel 2.4G Transmitter w/R3008SB Receiver  [12K]

Made with the rock-solid Futaba S-FHSS and T-FHSS protocols, the 12K works together with nearly a number of different Futaba receivers to allow for modelers' demands. The 12K can move and get telemetry information through T-FHSS protocol. Simply install Futaba telemetry sensors (offered separately) observe journey information, accept alerts during journey and much more. These sensors enable pilots to help keep an eye fixed fixed on battery pack voltage, altitude, price alongside key journey functions.

And telemetry, the 12K are employed with S.Bus2 gear to incorporate numerous servos, gyros and even more to set-ups with less cables. Pilots with non-telemetry set-ups takes advantageous asset of the interference-free S-FHSS protocol. An enormous, backlit LCD display, expandable 30-model memory, a 6V 1800mAh NiMH battery power and charger are just even more linked to features the 12K provides.

Pick from airplane and heli 12K systems using the R3008SB telemetry receiver included. FPV/drone pilots will appreciate the lightweight, compact R3001SB FPV drone receiver optimized about applications.

Transmitter Qualities:

• Sites: 14 (12 proportional, 2 switched)
• Compatible with T-FHSS and S-FHSS protocols
• Six 3-position switches, two 2-position switches, two slider levers, two rotary dials, four electronic trims and two push buttons for fast, fast access
• Headphone plug, trainer slot and S.Bus plug-in
• S.Bus2 system enables many servos, gyros and telemetry sensors with an assortment cables
• Model types: six types of main wing with three end kinds for airplanes, six swash sorts for helis and multi-rotor functions
• Enhanced stick feel with adjustable lengths and stress
• Dual rates/exponential
• Included 6V 1800mAh NiMH electric batteries and charger
• Large, backlit LCD display with adjustable comparison for easier reading. Push/dial procedure simplifies set-up
• Micro space for storage unit slot for saving model information and free system updates. (SD-32MB to 2GB; SDHC-4GB to 32GB, perhaps not included)
• Vibration function alerts pilots to various alarms and timers, besides to noise
• 10-character model naming
• Expandable 30-model memory
• 5 journey conditions (Helicopter and Glider model options)
• 5 customizable programmable mixes
• Servo just be sure to servo destination display
• Fuel mixing
• Stick calibration
• Servo speed
• Logic switching

Airplane Properties:

• 6 wing kinds
• 3 tail wing kinds
• 5 journey modes
• Pitch curve
• Throttle bend
• Throttle wait
• Aileron differential
• Flap setting
• Aileron to camber flaps
• Aileron to brake flaps
• Aileron to rudder
• Rudder to aileron
• Camber mix
• Elevator to camber
• Camber flap to elevator
• Butterfly function
• Trim mix
• Air stopping system
• Gyro mix
• V-Tail
• Ailevator (dual elevator)
• Winglet
• Engine rate
• Rudder to elevator
• Snap roll
• Multi-engine functionality
• Airbrake
• Helicopter F

Helicopter Properties:

• Six swash types
• Pitch fold and pitch trim
• Throttle fold and throttle hover trim
• Throttle hold
• Swash band
• Pitch to needle
• Pitch to rudder (revolution mixing)
• Gyro blending
• Governor mixing
• Timer settings
• Throttle percent timer

Glider Characteristics:

• Glider-specific functions
• 6 wing kinds
• 3 end wing types

Multirotor Properties:

• Throttle stick location warning
• Gyro Sense
• Flight Mode
• Throttle Curve
• Throttle Delay

R3008SB Receiver Qualities:

• T-FHSS protocol
• Double Antenna Diversity
• S.Bus/S.Bus2 ports (S.Bus2 slot for bidirectional telemetry sensors)
• 8-channel PWM traditional ports
• High voltage
• Battery fail-safe
• External voltage slot: 0-70V DC
• Power requirement: 4.8-7.4V
• Dimensions: 0.98 x 1.86 x 0.56 in (24.9 x 47.3 x 14.3 mm)
• Body fat: 0.36 oz (10.1 g)