Tamiya 44020 - 1/10 GP TG10-Mk.1 Chassis Kit - Pro Racing w/o Engine  [44020]

This value loaded kit is ideally worthy of serious racers. The kit uses the TG10 framework as a base, and adds ball bearings, super low friction dampers, a lightweight flywheel, a carbon top deck, an exceptional reduced deck and lots of other competitive features. Adopts shaft drive 4WD system for winning control

• Adopts shaft drive 4WD system for winning control
• Lightweight and durable framework contain 3mm thick perforated duralumin reduced deck and 2mm thick carbon top deck.
• Complete bearings and universal shaft enable acutely efficient operating.
• 4-wheel double wishbone suspension system features impact absorbing low friction dampers and stabilizer for constant cornering.
• Aluminum engine mount cools engine and heightens accessory durability.
• Lightweight flywheel provides increase to razor-sharp acceleration.

products Sold Separately

• 1/10 human anatomy for virtually any form of 4WD Touring automobile (excluding somebody that has fast wheel bases).
• 2-channel R/C system for engine automobiles & batteries.
• Tamiya FS-12LT Motor
• TG petrol and Tamiya Rev Top gas
• "energy Champ HP" 1.5V Alkaline booster battery power, plug cable/clip, and fuel filler.

• Chassis Type: TG10-Mk.1 PRO
• Scale: 1/10
• General Length: 435mm
• general Width: 194mm
• General Height: 122mm
• Minimal Clearance: 14mm
• bodyweight totally prepared: 1548g (excluding gas)
• Wheelbase: 257mm
• Tread (F/R): 155mm/164mm
• Chassis Material: 3.0t duralumin +carbon fibre
• Chassis Type: double deck
• Steering Tie-Rod: three elements
• Suspension F/R: double wishbone
• Caster Angle: F/R: 10/0� Camber angle: adjustable
• Toe angle F/R: adjustable/2�
• Dampers F/R: super low friction dampers
• Drive System: shaft drive regular 4WD
• Gear Ratio: 8.1:1
• Diff. Gear System F/R: bevel diff
• Brake: disk
• Tire Width/Diam F/R: 27/65
• Tread Pattern: F/R rushing slicks
• Tire Material: artificial synthetic

Specs

• Chassis Type: TG10-Mk.1 PRO
• Scale: 1/10
• general Length: 435mm
• General Width: 194mm
• Overall Height: 122mm
• minimal Clearance: 14mm
• weight completely prepared: 1548g (excluding gasoline)
• Wheelbase: 257mm
• Tread (F/R): 155mm/164mm
• Chassis Material: 3.0t duralumin +carbon fiber
• Chassis Type: double deck
• Steering Tie-Rod: three components
• Suspension F/R: dual wishbone
• Caster Angle: F/R: 10/0� Camber angle: adjustable
• Toe angle F/R: adjustable/2�
• Dampers F/R: super low friction dampers
• Drive System: shaft drive regular 4WD
• Gear Ratio: 8.1:1
• Diff. Gear System F/R: bevel diff
• Brake: disk
• Tire Width/Diam F/R: 27/65
• Tread Pattern: F/R rushing slicks
• Tire product: artificial plastic

choice Components Included

• TG10 Rushing Chassis
• TG10 Carbon Upper Deck Set
• TA03 Super Minimal Friction Dampers (Silver)
• TG10 Urethane Bumper
• TG10 Stabilizer Set
• Skyline GT-R Universal Shaft Set
• Aluminum engine Mount for TGX
• Lightweight Flywheel
• TR15T quality Brake Disk
• tall Torque Servo Saver Set
• Aluminum 5mm Ball Connector