Kyosho 30973T1 - 1/7 EP 2WD Buggy SCORPION XXL VE readyset Color Type 1 (White)  [30973T1]

Menacing appearance and satisfaction to fit!
Appears BAD, runs good! A facile task to work, tough within the competition!

The most recent Kyosho Scorpion XXL combines the effective off road performance craved by off road racers with easy drivability of a XXL reduce road unit. The sluggish, typically sluggish result of current big scale models ensure it truly is harder discover suitable areas to race them. Kyosho creates another and exciting truth for major fans, delivering a machine that's notably little, but features the explosive performance and lightning-quick reactions of a finely-tuned race device. New framework design! The 3mm primary framework features a molded "perimeter" frame that leads to rock-solid rigidity. Alongside supplying superior suspension system system travel, the paid off surprise mounting place from the front "gull" hands keeps the shocks just easy for maximum cornering costs and exceptional security through the complete roughest areas. This really is complimented by today's straight back suspension system system system typical of 1/10-scale automobiles, strengthened to make a robust suspension system system system with this big device. Leading suspension system system and steering geometry end up in superior large-scale control like minimal time before.

• The receiver package is certainly the appropriate size the compact KR200 receiver. The mounting destination can be as far feasible through the electronics to cut back feasible disruption.
• Features hex type screws for safe installation and razor-sharp look too.
• The molded front component and straight back surprise towers function ultra rigid construction for precision performance, while permitting adequate flex to increase durability.
• Molded roll club and roof are setup with dummy fog lights. Roll club is pre-installed in regards to the Readyset.
• Includes a wing mount that enables setting up a large part wing through Inferno MP9 (optional). Minimal modification to wing is essential.

ReadySet articles

• Factory assembled framework with 2-channel, 1-servo, 1-ESC R/C device
• Syncro KT-201 transmitter
• Pre-painted body
• Pre-installed Team Orion VORTEX 7 brushless engine
• Pre-installed Team Orion VORTEX VE-XXL ESC
• Cross wrench

Necessary for procedure

• Battery for chassis/ 7.2-14.4V Li-Po battery with super plug connector
• Battery charger
• 4 x AA-size alkaline batteries for transmitter

Chassis Technical information

• Length 630mm
• Width 402mm
• Height 244mm
• Wheelbase 452mm
• Tread (F/R) 353 / 331mm
• Tire(F/R) F130�43mm / F140�71mm
• Gear Ratio 16.0:1
• Body fat 4000g(with particular body)
• engine Orion Vortex 7 brushless