Kyosho 32527GR - Radio Controlled Electric Powered Crawling car MINI-Z 4x4 Series Ready Set Land Rover Defender 90 Heritage Grasmere Green / Alaska White  [KY-32527GR]

In 2019 the planet's hottest mini RC series, referred to as Kyosho MINI-Z, celebrated above two decades of unmatched performance and scale realism inside hobby-grade RC category. The constant pursuit of performance and development has produced the creation of a completely-new ‘MINI-Z 4x4’ design that delivers an all-new driving experience for RC fans out of all the stripes, with superior general design, driving performance and top-notch injection-molded scale body construction. An excellent function the MINI-Z 4x4 series could be the greater focus of human anatomy information and quality of finish that also surpasses current benchmarks set by the MINI-Z. Your body could be molded with thicker item to raised resist crash damage from procedure in rough landscapes. Integrating comparable ladder- design framework of genuine 4WD cars, the MINI-Z 4x4 boasts a 3-link rigid axle suspension system system system combining precisely what would generally be two top links into just one top A-arm to give you maximum suspension system system movement. A specially created high-torque steering servo enables this device to put its elbows around within the difficult landscapes for excellent performance in toughest rock-crawler conditions. The high-torque 130-size engine results in the beast inside MINI-Z 4x4, especially designed for run well into the low to moderate prices typical in crawling.

built to balance exquisite design, scale detail and superior driving performance, most of the MINI-Z 4x4 needs is 8 x AAA alkaline batteries (provided on their own). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the beautiful innovative look. The Kyosho Mini-Z 4x4 may be the only mini crawler providing you with the full collection of crawling performance in a substandard package.

TECHNICAL INFORMATION

• Length 185.8mm
• Width 83mm
• eight 104.0mm
• Chassis Type MX-01
• Wheel Base 110mm
• Tread F/R:72.7mm
• Weight 238g (excl. battery)
• Motor/Engine 130 Class
• Gear Ratio 55.44:1/46.20:1/39.60:1
• 34.65:1/30.80:1/27.72:1
• Front Tire Diameter 42.0mm
• Rear Tire Diameter 42.0mm
• Front Tire Width 14.3mm
• Rear Tire Width 14.3mm
• Battery 4 x AAA alkaline
• Transmitter Syncro KT-531P
• Speed Approx. 3.3km/h6.6km/h (Pinion gears 10T 20T)
• operating Time Approx. 60 moments

KIT CONTENT

• Complete framework with integral electronic devices.
• Factory-painted body detailed with many fine details
• KT-531P 2.4GHz transmitter
• Pinion gear set(10T12T14T16T18T20T)
• 3 types of pinion gear spacers

REQUIREMENT TO OPERATE

• 4 x AAA batteries the transmitter
• 4 x AAA batteries for framework (Alkaline or NiMH)