Kyosho 32530MB - Radio Controlled Electric Powered Crawling car MINI-Z 4x4 Series Ready Set Suzuki Jimny Brisk Blue Metallic  [KY-32530MB]

In 2019 the entire world's top mini RC show, called Kyosho MINI-Z, celebrated above two decades of unmatched performance and scale realism in hobby-grade RC category. The constant search for performance and development has triggered the creation of a completely-new ‘MINI-Z 4x4’ design offering you an all-new driving experience for RC fans of all of the stripes, with superior general design, driving performance and top-notch injection-molded scale human anatomy construction. A considerable feature of MINI-Z 4x4 show could be the greater focus of human anatomy information and quality of finish that also surpasses present benchmarks set by the MINI-Z. Our body ordinarily molded with thicker item to raised resist crash harm from procedure in rough area. Integrating comparable ladder- design framework of genuine 4WD automobiles, the MINI-Z 4x4 boasts a 3-link rigid axle suspension system combining what would typically be two top links into one top A-arm to give you maximum suspension system system system motion. A specially produced high-torque steering servo allows this revolutionary product to position its elbows around in difficult landscapes for excellent performance into the most challenging rock-crawler conditions. The high-torque 130-size engine results in the beast in MINI-Z 4x4, especially tailored for run well inside low to moderate rate differs typical in crawling.

Built to balance exquisite design, scale information and superior driving performance, all the MINI-Z 4x4 requirements is 8 x AAA alkaline batteries (supplied individually). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the wonderful imaginative appearance. The Kyosho Mini-Z 4x4 will be the only mini crawler providing you with the entire choice of crawling performance in an inferior package.

TECHNICAL DATA

• Length 193mm
• Width 84mm
• Height 90.0mm
• Chassis Type MX-01
• Wheel Base 120mm
• Tread F/R:72.7mm
• Weight 242g (excl. battery)
• Motor/Engine 130 Class
• Gear Ratio 55.44:1/46.20:1/39.60:1
• 39.60:1/34.65:1/34.65:1
• Front Tire Diameter Φ37.0mm
• Rear Tire Diameter Φ37.0mm
• Front Tire Width 12mm
• Rear Tire Width 12mm
• Battery 4 x AAA Alkaline
• Transmitter Syncro KT-531P
• Speed:Approx. 2.7km/h5.4km/h (Pinion gears 10T 20T)
• Running Time Approx. 60 mins

KIT CONTENT

• Complete framework with essential gadgets.
• Factory-painted human body step-by-step with many fine details
• KT-531P 2.4GHz transmitter
• Pinion gear set(10T12T14T16T18T20T)
• 3 kinds of pinion gear spacers

REQUIREMENT TO MAKE USE OF

• 4 x AAA batteries the transmitter
• 4 x AAA batteries for framework (Alkaline or NiMH)