Kyosho 33101 - 1/10 Scale Radio Controlled .15 Engine Powered 4WD QRC Series Readyset Nitro Tracker w/KT-231P+ [KY-33101]

Price:

NZD$0.00

Brand:

Kyosho

Model:

KY-33101

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - Off-Road - Trucks category

Write a review

Description

Using the rock-solid performing safety of a huge tire item with wide tread, the almost square dimensions of Nitro Tracker creates amazing driving capability. You need to this 1/10 scale down road automobile anywhere you are thinking about to take pleasure in the bigger degree superior mechanics with this particular genuine engine-powered R/C car, like QRC (fast Reverse Clutch) that allows ahead, neutral and reverse procedure. Another channel in regards to the KT-231P+ transmitter runs a servo to move the gears in QRC to change the drive gears between Forward-Neutral-Reverse, much like a real vehicle. The pre-installed effective KE15SP engine combines utilising the maintenance-friendly radio box and fuel pump that delivers gasoline effectively towards the carburetor from vehicle's gas tank and engine-stop lever that correctly brings the motor to an end. With this particular Readyset, all you have to is fuel, engine beginning tools, and batteries to see the effective practical performance with this particular awesome Nitro Tracker!.

●Readyset features pre-assembled 4WD framework with shaft-driven 4 bevel gear diffs on front component and rear and finished human body set.
●3rd channel runs the QRC system (fast Reverse Clutch) to take care of ahead, fundamental and reverse.
●2-speed transmission with adjustable modification timing makes maximum using the KE15SP engine’s energy musical business.
●One-piece stiffener and radio industry increases framework rigidity and dustproof target for receiver and power packs.
●Includes waterproof KS4031-06W servos for steering, throttle and alter modification.
●Double wishbone suspension with adjustable camber and toe angle.
●Body post height is modified in 2mm increments..

Nitro Tracker features an aluminum flat pan framework set up with advanced level elements, for instance the double wishbone suspension system system system with adjustable camber and toe, proven on other Kyosho models. QRC system is made behind the gas tank.

The easy design from QRC system includes 5 gears, shaft and supply to utilize the clutch and you'll be supplying control of ahead, neutral and reverse. Shift into reverse to avoid immoveable hurdles inside path.

Includes the 2.4GHz Syncro KT+231P+ transmitter that immediately manages regularity bands. A switch that operates another channel are available throughout the hold to maneuver between forward-neutral-reverse (switch destination: highest=FWD, middle=Neutral, lowest=REV).

Includes KE15SP engine fitted with recoil starter for effortless launching and will be offering stable idling and simple procedure, also for newbies.

Fuel tank has pump that sends gas effortlessly towards carburetor with 2-3 pushes linked to the pump key. Motor could be made with countertop lever that stops the motor properly.

Radio field is dustproof to lessen technical trouble furthermore inside the harshest down road conditions including features maintenance-friendly front side & back stiffeners. Pilot light programs whenever power is ON so that you won’t forget to alter power OFF you'll want to definitely used.

Oil shocks provide superior cushioning for exemplary operating security over rough areas. Dial modification of framework height enables developing improvements to match any conditions.

Pickup automobile human body is pre-cut and printed in genuine usa muscle tissues design, matched by big diameter tires and tires.

Newly produced 1/10 scale block pattern φ120mm x 56mm tires create awesome performance on any area. Intimidating black colored colored colored tires add the completing touch to your mighty unit.

TECHNICAL INFORMATION

Length 418.5mm
Width 321mm
Height 194mm
fat 2,650g(approx.)
Wheelbase 298.5mm
Tread (F/R) 265mm
Tires (F/R interchangeable) φ120×56mm
Gear Ratio ahead (first) 20.9:1 / (2nd) 13.9:1
Reverse (initial) 24.1:1 / (2nd) 16.0:1
motor KE15SP with recoil

KIT CONTENT

Completed framework with R/C radio installed
Transmitter (KT-231P +)
Binding stick
Hex wrench(1.5mm / 2mm / 2.5mm)
Cross wrench (large)
Instruction manual
2 nylon straps (for repairing air cleanser)

REQUIREMENT TO RUN

Glow fuel
8 x AA batteries for transmitters and receivers
Starting product (fuel pump, plug heater)

Hot Brands

Kyosho 33101 - 1/10 Scale Radio Controlled .15 Engine Powered 4WD QRC Series Readyset Nitro Tracker w/KT-231P+ [KY-33101]