Kyosho 34302 - ULTIMA RB6.6 1/10 EP 2WD Buggy KIT [KY-34302]

Price:

NZD$0.00

Brand:

Kyosho

Model:

KY-34302

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - Off-Road - Buggy - Electric Powered category

Write a review

Description

Following the IFMAR Electrical Off-Road World Championship in Ultra high hold areas especially artificial turf and carpeting are getting to be main-stream in off road battle whilst the 2015 IFMAR Off-Road World Championships run at Yatabe Arena in Ibaraki, Japan. To keep before these constantly evolving designs, Kyosho’s Ultima RB6 is updated towards the fresh 6.6 model. While keeping the superiority of proven suspension system system and steering in RB6, this amazing 6.6 model features a myriad of 4 different gearboxes: “Rear Motor”; “3 Gear Midship”; “4 Gear Midship”, and “Lowdown Midship”. Along with the ever-reliable straight back motor for looser areas, the 6.6 features midship transmissions for greater hold dust areas and a newly produced compensated C of G lowdown midship transmission for ultra high-grip areas specially synthetic turf and carpeting. With step-by-step accuracy environment ability, this solitary product works together any area sort that a racer must drive on. Additionally, the wider 7075-T6 grade main framework with part guards is unchanged to give you the cornering top features of its width. With the midship design, either right or sideways battery mounting orientation could possibly be accustomed fine-tune the framework fat blood flow impact on running performance.

・Features upgraded needs in line with the Ultima RB6 (No.34301) model circulated on in 2015.
・Highly adaptable framework settings with range of lowdown midship motor, midship motor and back motor designs.
・Ball differential features endurance and superior precision tungsten diff balls.
・Features one-piece wheel shafts made from high-strength steel.
・Clamp screw aluminum hex wheel hubs offer protected traction and accurate rotation on backside.
・Large ability slipper clutch works together with with an elevated power machines.
・Gun metallic anodized aluminum elements create a formidable searching finish.
・Includes X-GEAR ball diff oil, high graphite oil and shock springs.

Incorporates high level requirements including: high rigidity 7075-T6 main framework, surface-tracing Big Bore shocks and range of motor layout.

With the RB6 model’s width, the 7075-T6 grade primary framework features increased rigidity and reduced center of gravity to execute both in high-speed and high-grip competition conditions.

Battery are oriented right or sideways (with midship design) for precision modification of framework fat blood supply to assist the hold and design of assorted rushing courses.

Newly developed low down midship transmission decreases the spur gear axis by 15.5mm (set alongside the midship transmission included), to dramatically reduce steadily the framework center of gravity.

Includes number of 3-gear or 4-gear midship transmissions. 3-gear transmission shown in photo delivers sharper throttle response compared to the 4-gear and it is better suited to high-grip track areas.

4-gear midship transmission provides easier control set alongside the razor-sharp throttle reaction concerning the 3-gear transmission. 3-gear and 4-gear transmission choices offer a decisive race benefit.

Includes sus pins that permit 3 caster angle settings: 0°, 2° and 4°. Precision establishing modification enables superior cornering and satisfaction over gaps.

Uses a similar one-piece steel wheel shafts, hardened ball ends and chrome-moly metal adjustable tie rods due to the fact the last model for superior crash opposition and durability.

Features gull-wing shaped suspension system system hands that help maximum feasible undertake back shocks. Designed with moderate shock springs for additional straight back grip.

TECHNICAL DATA

Length: 395mm
Width: 249mm
Height: 140mm
Wheelbase: 285mm
Tread (F/R): 221mm/201mm
Tire(F/R): supplied separately
Gear Ratio: 2.60 :1 (additional decrease ratio), Spur 76T/pinion gear offered independently
body fat: 1,620g (approx.)
Motor: provided individually

REQUIREMENT TO WORK

2-channel, 1-servo, 1-ESC R/C System

motor

Battery for framework

Tires

Tire inners

Battery charger

Pinion gears

Paint for body

Batteries for transmitter

Tools

Hot Brands

Kyosho 34302 - ULTIMA RB6.6 1/10 EP 2WD Buggy KIT [KY-34302]