RADTEC BEL-10003 S3M513 Low Friction Front Drive Belt for T4 A800 IF14 [RAD-BEL-10003]

RAD-BEL-10003 Radtec Low Friction White Front Drive Belt (S3M513) for Stock (T4/A800/IF14)

Price:

NZD$24.09

Brand:

RADTEC

Model:

RAD-BEL-10003

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

R/C General - Belt / Belt Tensioner

Optimise Power Transfer with RADTEC BEL-10003

For model racers aiming to optimise drivetrain smoothness, the RADTEC BEL-10003 low friction white front drive belt is a practical upgrade. Specifically matched to T4, A800 and IF14 chassis, the S3M513 belt lowers drag to deliver cleaner acceleration and reduced drivetrain heat.

Main Benefits of the RADTEC BEL-10003 Belt

Material: White, low-friction compound chosen to limit surface drag and extend belt life.
Size: S3M513 sizing tailored to fit the belt tracks on T4, A800 and IF14 machines.
Functionality: Cuts resistance in the front drive to help the car accelerate more efficiently.
Compatibility: Ideal for original equipment setups and mild tuning on T4, A800 and IF14 chassis.

What electronics pair well with this belt?

Standard brushless motor and speed controller combos used on T4, A800 and IF14 work well; the belt reduces drivetrain drag so you may notice smoother throttle response with the same electronics.

Can I run this belt on modified chassis layouts?

The belt is designed for the stock belt path on T4, A800 and IF14. It can work with minor layout changes but check alignment and pulley positions before use.

Any tips for correct tensioning?

Aim for firm tension with a small amount of play. Over-tightening increases bearing load, while too loose causes skipping. Recheck after a short run.

What surfaces suit this belt best?

The belt performs consistently on carpet and outdoor tracks; keep grit and debris away from pulleys to maintain low friction.

Hot Brands