Tamiya #58294 - Tamiya 1/10 R/C top quality F201 w/Original Body KitThis is the 1/10 Scale electric, Radio Controlled, 4 Wheel Drive
Tamiya F201 Chassis On-Road automobile Kit.
TRAITS:
Chassis: Monocoque synthetic F201 kind.
Drive: Four wheel shaft drive.
Motor: RS 540 sport tuned.
Ball Bearings: Complete set included.
Shocks: Oil-filled synthetic bodied.
Gearbox: Closed front side and rear.
Differentials: Planetary gear.
Transmission: Single-speed.
Tires: 1.18" (30mm) tread width, 2.4" (62mm) external diameter, 1.5"
(38mm) interior diameter synthetic treaded.
Wheels: 1" (25.5mm) width, 1.6" (40mm) inside diameter grey plastic
spoke.
Speed Control: included, utilize electronic kind for a few easily of good use performance.
Bumpers: Front and back black colored plastic.
Suspension: Adjustable.
Camber Tie Rods: Adjustable. Camber could be the angle where the tires
sit vertically.
Steering Tie Rods: Adjustable. Caster/Toe-in concerns the angle
that the tires aim inward because seen from above.
Steering: Bell-crank type.
Servo Saver: Included.
Body: One clear and something Lexan Carbon Fiber Pattern body with black
plastic back spoiler.
INCLUDES: One Tamiya F201 Chassis with oil-filled shocks, 540 stock engine,
one evident and another polycarbonate patterned human anatomy, treaded rubber
tires, foam inserts, plastic mesh tires, recommendations, antenna
tube, decal sheet, hardware, one driver helmet for every single human body,
20 enamel metal pinion gear, 55 enamel synthetic spur gear, shock oil.
NEEDS: broadcast: 2-Channel with one servo.
Radio Batteries: (8) AA size
Speed Control: Electronic.
Battery: 6-cell flat with standard connector, 7 mobile will not fit.
Charger: AC/DC timed or top for 6-cell battery
Paint: Spray or brush-on for polycarbonate synthetic bodies.
Misc. Products: Building and track gear
SPECS: VEHICLE-
Length: 16.7" (425mm)
Width: 7.7" (196mm)
Height: 3.3" (100mm)
fat: 3.3 pounds (1480g)(approx.)
Wheelbase: 11.2" (280mm)
Gear Ratio: 2.75:1
Tires- Front and right back: 1.18" (30mm) tread width, 2.4" (62mm) outer
diameter, 1.5 (38mm) inner diameter plastic treaded.
BODY-
Length: 14.5" (368mm)
Width: 6.25" (159mm) at cockpit (widest point)
1.25" (32mm) at from tires (thinnest point)
Height: 3.34" (85mm)
FEEDBACK: For Replacement Ball Bearings usage:
Qty. Size venue Bearing Set Qty.
(4) 10 x 15mm Ball Diffs
(4) 8 x 5mm Ball Diffs
(2) 8 x 12mm Gearbox
(1) 5 x 11mm Gearbox
(1) 5 x 10mm Gearbox
(2) 10 x 15mm back Uprights
(2) 8 x 5mm Steering Arms
(2) 10 x 15mm Front Uprights
(2) 5 x 11mm Drive Shaft
(1) 5 x 10mm Drive Shaft
(1) 5 x 8mm Drive Shaft
(4) 6 x 12mm tires