Futaba 10CHG 10-Channel 2.4GHz/ R6208SB  [10CHG_c3]

Futaba 10CHG 10-Channel 2.4GHz/ R6208SB
Price:
NZD$961.71
Brand:
Futaba
Model:
10CHG_c3
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category
Write a review
  • The 10CG: pro-level features at a sport-system cost.
  • The 10CG is fantastic for the price-conscious pilot — a, 2.4GHz treasure trove of features previously discovered merely with regards to the advanced Futaba systems.
  • However it’s also a technique that boasts advantages few others can claim: 7-point throttle and pitch curves; 4 heli journey modes; a circular dozen factory-defined glider mixes; designs for development swash dish kinds; swash band; and logic switches that permit you to trigger a timer or other function simply by changing the jobs of specific sticks or switches.

10CG System Overview:

  • Dial ‘n Key™ development w/joystick
  • Airplane, heli and glider software
  • 2048 resolution
  • Real-Time Response™
  • Smart Change tech™
  • Fundamental & advanced level menus
  • 15-model memory, expandable to 48 models*
  • 10-character model & particular naming
  • Assignable switches & dials/functions
  • Model choose, content, re-set
  • Data transfer
  • 2 proportional slider switches
  • Fail-safe, sub-trims, servo reversing & EPA
  • Digital trims & trim action, expo & dual/triple rates
  • 160 x 72 backlit LCD w/adjustable comparison
  • Servo monitor display
  • Auxiliary channel display for 1-step function/switch assignment
  • Model & system timers
  • Complete functionality trainer system (cable required)
  • Throttle cut, hold & idle down
  • Mode 1-4 selectable
  • Sticks w/length and anxiety modifications
    * requires optional 128K CAMPac Module (FUTM9408)

Airplane qualities:

  • 8 programmable mixes
  • Elevator/Flap
  • Throttle needle
  • Aileron differential
  • Flaperons
  • V-tail
  • Elevon
  • Air stopping system w/elevator wait
  • Ailevator
  • 4-position snap roll switch
  • 2 split gyro settings
  • 7-point throttle curve
  • Flap trim 

Heli properties:

  • 6 programmable mixes
  • Hover/pitch
  • Hover throttle
  • 8 swash meal types w/graphics
  • Swash AFR
  • 5-point revo combining
  • Gyro menu
  • 7-point throttle & pitch curves w/delay
  • High/low pitch setting
  • Swash ring
  • Throttle hold 3 idle-ups w/delay

Glider Features:

  • 8 programmable mixes
  • Butterfly/elevator (2)
  • Elevator/flap
  • Chamber mix
  • Aileron/flap
  • Aileron/rudder
  • Flaperons
  • V-tail
  • 4-point offset
  • Spoiler mix
  • Single/dual flap servos
  • 5 journey conditions
  • 3 wing kinds
  • Adjustable engine cut

Glider Features:

  • 8 programmable mixes
  • Butterfly/elevator (2)
  • Elevator/flap
  • Chamber mix
  • Aileron/flap

R6208SB:

  • R6208SB is a fresh S.Bus System 2.4Ghz high Voltage Receiver from Futaba. It generates making use of electronic serial information connection technology to supply control signals in regards to the receiver and servos using S.Bus hubs and cables.
  • The 10CG 2.4GHz could be the perfect system for the value-oriented pilot: supplying far more than you’d expect for less than you’d imagine.

Includes:

  • Futaba 10CHG 2.4Ghz Transmitter
  • R6208SB Tall Voltage Receiver
  • Heavy-Duty Change Harness
  • *No RX Battery

R6208SB Spec:

  • Operating Voltage: 3.8V ~ 7.4 V
  • Dimensions: 1-7/8 x 1 x 9/16" (47 x 24.9 x 14.3mm)
  • Body fat: 0.5oz (13.8 g)

Copyright © 2008-2024 rcjaz.co.nz All rights reserved


Merry Deals for Every Hobbyist!
Redeem [ XM03 ] for 3% OFF—no minimum required!
Use [ XM05 ] for 5% OFF on orders over $100!
Go big with [ XM10 ] for 10% OFF on orders over $200!
This Christmas, gift your hobby the savings it deserves!