Futaba 18MZA 18-Channel 2.4G T-FHSS with R7008SB TX-Li Ion 18MZ Airplane Version Transmitter  [FP-18MZA-WC]

Futaba 18MZ 18-channel 2.4GHz Computer broadcast System
whenever sheer number of actions it is possible to just take along with the 18MZ is impressive, the total amount of means it provides you for doing them is absolutely absolutely nothing in short supply of awe-inspiring. There's computer software for airplanes, helis and gliders, eight trip conditions and ten programmable mixes for every and plenty of factory-programmed mixes. And much more features than you'll most likely found in several years of traveling.

If that's genuine, well-known genuine real real question is, "Why contain them?" The reaction is easy: it's because no two pilots arranged a radio in properly identical means. The main description the 18MZ provides such unparalleled setup and performance flexibility is quite maybe it's setup inside primary method of all: yours.

Features:

• Using the high-voltage R7008SB, your servo and channel options are wide open.Use around 8 systems with standard PWM outputs,up to 18 organizations (16 proportional + 2 switched) through two S.Bus ports, and revel in S.Bus setup convenience and programmable performance.
• Built-in 0.3 megapixel digital camera makes making use of aircraft ID pictures simple and fast.
• The 6" diagonal (152 mm) HVGA touchscreen display provides 640 x 240 meaning and adjustable backlighting for outstanding presence. SensorTouch technology allows you to navigate and prepare with expense and ease.
• Two USB ports provide simple how to relate with a keyboard or mouse, get a hold of and closet telemetry information or access setups saved on an external memory stick.
• This serial program provides the same convenience as soon as the stand-alone CIU-2. It's ideal for development GY520 and CGY750 gyros, and S.Bus and S.Bus2 Servos.
• Stick views adjust effectively, to tailor the 18MZ's feel to your hand.
• The 18MZ comes with a 7.4V, 3500mAh LiPo transmitter battery pack. Provides power for about 6 hours of uninterrupted traveling.
• With effortless Link ID, you can connect the transmitter and receiver with a tap concerning the touch screen.
• Large spacing between shoulder switches renders room the hands to remainder.
• The removal of one screw frees the entire switch block. Particular switches are unscrewed for effortless replacement or relocated for a custom setup.
• Look into the 18MZ, while'll grasp Futaba's dedication to reliability at every modification, through the utilizing area mount technology to attenuate the outcome of vibration to Ball Grid Array to pack one of the most radio anyway area.
• Jacks for S.Bus servo development, in-transmitter recharging as well as the earphone is available on straight back panel for fast access and protection.
• The high-voltage R7008SB works together alongside Futaba telemetry sensors, including S.Bus and S.Bus2 servos. Both are plug toward R7008SB, without software containers and decoders required by other systems.* Decoder required if non-S.Bus servos are utilized.

Overview:

• Techniques: 16 proportional, 2 switched
• Suitable for:
  • FASSTest, FASST and S-FHSS protocols
  • Futaba HV (High-Voltage) receivers
  • All Futaba telemetry sensors
• Free on the net computer software improvements
• 92MB interior memory
• Expandable model memory
• 32-character specific naming
• 32-character model naming
• Airplane, helicopter, glider and engine glider development
• 3 assignable rotary knobs
• 4 assignable slider switches (2/side)
• 5 assignable three-position switches
• 2 assignable two-position switches
• 1 assignable momentary two-position switch
• Dual, high-speed processors
• Earphone jack
• 0.3 megapixel camera
• Audio & film players
• integrated microphone
• Development tools for S.Bus servos & gyros
• Easy Link ID touchscreen
• Comfortable synthetic grips regarding sides and back
• Stick calibration, plus anxiety and angle corrections
• Quad bearing gimbals
• Quick model select
• Servo monitor (fundamental and going tests)
• 2 up/down timers
• integrated timer system
• Model timer
• 4 vibration warning alternatives (battery pack, condition, trim mix 1 & 2)
• Programmable trainer system
• Servo rate adjust
• Trim mix
• Programmable logic switches
• Consumer menu
• Sub-trim (240 actions; networks 1-16)
• Servo reversing (all systems)
• Fail-Safe (all sites)
• Battery fail-safe (all linear sites)
• Endpoint modification (all channels)
• Trim (adjustable action, price & mode)
• Journey conditions
• AFR
• AFR fold mode (6)
• AFR fold point volume (15)

Airplane programming features:

• 8 journey conditions
• 15 factory-programmed mixes
• Flap developing menu
• Differential ailerons
• Aileron to camber flap mixing
• Aileron to brake flap mixing
• Aileron to rudder mixing
• Airbrake to elevon Mixing
• Rudder to ailevator blending
• Rudder to elevator blending
• Camber combining
• Elevator to camber blending
• Camber flap to elevator mixing
• Snap roll combining
• Airbrake mixing
• V-Tail mixing
• Motor blending
• Fuel mixture
• Multi-Engine mixing
• Gyro blending

R7008SB Receiver Features:

• Bi-directional connection with a FASSTest Futaba transmitter utilizing the S.Bus2 slot
• Multiple optional telemetry sensors might be linked to the S.Bus2 slot plus the information exhibited regarding transmitter
• Includes both standard PWM production ports and S.Bus manufacturing ports
• External voltage slot, 0-70V DC
• The outside Voltage connector necessary for this can be:FUTM5551 CA-RVIN-700 EX VLT CBL

R7008SB Receiver Specs:

• Getting Frequency: 2.4GHz FASSTest system
• Energy Requirement: 3.7 - 7.4V (voltage range 3.5 - 8.4V)
• Current drain: 75mA
• Exterior voltage Port: 0 - 70V DC
• Size: 0.98 x 1.9 x 0.56" (24.9 x 47.3 x 14.3mm)
• Body fat: 0.38oz (10.9g)
• Antenna Length: 5-3/4"