Futaba 6EXAP 6-Channel FM 72Mhz/ R156F [6EXAP_c13]

Price:

NZD$203.68

Brand:

Futaba

Model:

6EXAP_c13

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder twin cost switch - make use of this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are setup but choose, however in most circumstances, when switch is ��up�� the throws are greater (��high rate��) after the switch is ��down�� the throws are less (��low rate��). This switch in addition flips between exponential rates (if used).
Flap control dial/Channel 6 - This dial runs the servo mounted on channel 6 in receiver when your model has flaps here is the control regularly make use of them.Aileron/elevator control stick -Mounting point for optional throat strap.
Trim levers (all) -Used to move the fundamental or center host to each servo as labeled to your diagram.
Billing jack - Port for asking the transmitter batteries because of the included battery power charger.
On-off switch
DATA INPUT lever - constantly exchange the values with this various functions presented on LCD display screen.
Liquid-crystal display (LCD) - shows development modes and values joined up with with.
MODE key - accustomed scroll through and show the ten or eleven(PCM) different functions.
CHOOSE key - accustomed show the values the current function.
Throttle-cut switch - to work alongside the throttle-cut function, repaid the throttle stick totally, then drive the throttle-cut modification to totally shut the carburetor and shut because of this motor.
Throttle/rudder control stick - operates the servos attached with channel 3 (throttle) and channel 4 (rudder) into the receiver.
Trainer switch - runs the trainer functions. To operate as a trainer switch the transmitter should be linked to another transmitter via. a trainer cable (available independently).
Retractable landing gear switch/Channel 5 - modification runs the servo connected with channel 5 in receiver as soon as your model has retractable landing gear this is actually the control constantly expand and retract the gear.
Antenna - Radiates signals towards receiver. Do not ever travel a model without entirely expanding the antenna or you may create disruption and also other modelers and decrease functional indication assortment of the transmitter. The antenna are eradicated and changed with another in case its accidentally broken.

Hot Brands

Futaba 6EXAP 6-Channel FM 72Mhz/ R156F [6EXAP_c13]