Futaba 6EXAP 6-Channel PCM 40Mhz/ R136HP/ 4xS3003 [6EXAP_c8]

Price:

NZD$323.30

Brand:

Futaba

Model:

6EXAP_c8

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder twin price switch - make use of this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses is set up you choose, but generally speaking, as soon as the switch is ��up�� the throws are greater (��high rate��) when the switch is ��down�� the throws are less (��low rate��). This switch additionally flips between exponential expenses (if used).
Flap control dial/Channel 6 - This dial runs the servo connected to channel 6 in receiver just in case the model has flaps this is actually the control used to work them.Aileron/elevator control stick -Mounting point for optional neck strap.
Trim levers (all) -Used to get the essential or center host to every servo as labeled in the diagram.
Charging you jack - Port for recharging you the transmitter batteries utilising the included battery charger.
On-off switch
INFORMATION INPUT lever - frequently replace the values linked to different functions shown regarding LCD screen.
Liquid-crystal display (LCD) - shows programming modes and values joined up with up with.
MODE key - accustomed scroll through and show the ten or eleven(PCM) different functions.
PICK key - regularly reveal the values the existing function.
Throttle-cut switch - to work with the throttle-cut function, lower the throttle stick entirely, then drive the throttle-cut modification to fully shut the carburetor and shut of motor.
Throttle/rudder control stick - operates the servos attached with channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - runs the trainer functions. To obtain outcomes as a trainer switch the transmitter should be connected with another transmitter via. a trainer cable (available independently).
Retractable landing gear switch/Channel 5 - modification operates the servo linked to channel 5 inside receiver if model has retractable landing gear here is the control accustomed expand and retract the apparatus.
Antenna - Radiates signals towards receiver. Don't ever travel a model without totally expanding the antenna or perhaps you could create disturbance as well as other modelers and decrease practical indication collection of the transmitter. The antenna may be eliminated and changed with another whenever it's accidentally broken.

Hot Brands

Futaba 6EXAP 6-Channel PCM 40Mhz/ R136HP/ 4xS3003 [6EXAP_c8]