Futaba 6EXAP 6-Channel PCM 40MHz/ R146IP [6EXAP_c4]

Price:

NZD$217.25

Brand:

Futaba

Model:

6EXAP_c4

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder twin cost switch - make the most of this modification to flip between two aileron, elevator and rudder control throw settings. The throws could possibly be create however determine, but generally speaking, in the event that switch is up the throws are greater (advanced) when the switch is down the throws are less (low priced). This switch furthermore flips between exponential prices (if used).
Flap control dial/Channel 6 - This dial operates the servo installed on channel 6 within the receiver if the model has flaps here is the control helpful to work them.Aileron/elevator control stick -Mounting point for optional neck band.
Trim levers (all) -Used to maneuver the essential or center position of each and every servo as labeled in to the diagram.
Recharging jack - Port for recharging the transmitter batteries because of the included battery pack charger.
On-off switch
DATA INPUT lever - often replace the values concerning the various functions exhibited regarding the LCD display screen.
Liquid-crystal screen (LCD) - shows development modes and values joined.
MODE key - frequently scroll through and show the ten or eleven(PCM) different functions.
PICK key - constantly expose the values the existing function.
Throttle-cut switch - to utilize the throttle-cut function, reduced the throttle stick totally, then drive the throttle-cut key to fully shut the carburetor and shut from the motor.
Throttle/rudder control stick - runs the servos attached with channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - runs the trainer functions. To work well with as a trainer switch the transmitter needs to be connected with another transmitter via. a trainer cable (available individually).
Retractable landing gear switch/Channel 5 - modification runs the servo attached to channel 5 in receiver when your model has retractable landing gear this is actually the control usually stretch and retract the apparatus.
Antenna - Radiates signals on receiver. Never ever travel a model without entirely expanding the antenna or just just you could create disturbance to varied other modelers and decrease functional indicator selection of the transmitter. The antenna might removed and changed with another in case it is unintentionally broken.

INCLUDES:
Futaba 6-Channel 6EXAP transmitter
Futaba R146IP Receiver
Change Harness
handbook

SPECS:
Transmitter
T6EXAP Transmitter with programmable blending and 6-model memory.
Transmitting on 40 / 72 MHz musical organization.
Os: 2-stick, 6-channel system
Modulation: FM(PPM) and PCM
power: 9.6V NT8S600B Ni-Cd battery or 12V alkaline battery
present drain: 250mA

Hot Brands

Futaba 6EXAP 6-Channel PCM 40MHz/ R146IP [6EXAP_c4]