TRAXXAS TRX4 MERCEDES-BENZ Spare Tyre Support Mount TRX4ZSP67 by GPM  [TRX4ZSP67]

Adjustable spare tyre mount for TRX4 Mercedes

Made from 1.2mm stainless steel, this spare tyre support is an aftermarket part for the TRAXXAS TRX4 MERCEDES-BENZ 1/10 crawler that holds and positions a range of spare tyre sizes on the vehicle's spare carrier and is not intended for full-size use.

The hook screw provides roughly 10mm of height adjustment so different tyre diameters can be accommodated. The main plate's stainless construction cuts corrosion risk while maintaining stiffness. The clamp uses two stainless plates with fixed screws and locknuts each side; gold-coloured screws and shims are included and some mounts may need drilling or reaming during installation.

Installation advice: fit the mount into the spare tyre bay, test-fit your spare, adjust the hook screw for clearance and lock the nuts. Use the included 2.5mm drill bit if holes require enlarging and confirm there is no contact with bodywork or suspension before final assembly.

• Support Mount - 1pcs
• 3M Double-sided Tape - 1pcs
• 2.5mm Drill Bit - 1pcs